C-25 Steel Plate Rack
  • Description

  • Related Targets

  • Safety Information


C-25 - Steel Plate Rack: $1300.00 Plus Shipping


The Center Fire Plate Rack features six 8" diameter AR500 Steel Targets, 3/8" thick mounted to a common frame.  AR500 steel absorbs bullet impact without damage.  The targets are bolted to the pivot mechanism eliminating any welding on the AR500 steel.  The front deflector is angled downward at 45° to safely direct missed shots toward the ground and protects the mechanism.  Targets are reset to the upright position by pulling the rope from the firing line.  50 ft of rope is included.  The legs and reset mechanism are removable for ease of transport.

For rifle shooting an AR500 Shield is available that replaces the front deflector.  See the Related Products tab for more information on the AR500 Shield for the Plate Rack.


Approximate dimensions:

79 wide x 47 high to centerline of targets x 40 deep at base of legs

Rated for 3000 FPS(Feet Per Second) at Impact.

Approximate shipping weight: 325 lbs



The targets produced by CMP are made from AR500 steel for long life and minimum damage due to bullet strikes. The stands, bases and mounting brackets are made from normal steel and can be damaged by repeated bullet strikes, and will not withstand rifle bullet strikes. The design of the targets protects much of the base or hanger with the AR500 target face, but occasional hits will occur. The hardware used to mount the targets is Grade 8 and will better withstand repeated bullet strikes. Never use a lower grade of bolt. Replacement hardware is available from CMP.

Pistol shooting at our targets should be performed beyond a range of 15 yards.
Rifle (max 3000 feet per second at impact) shooting at our targets should be performed beyond a range of 100 yards.
Never use armor piercing or steel core bullets to shoot any target
Always place the target in front of a backstop to capture any bullets which miss the target.
Always inspect the targets and support structure before and after use for damage and for proper and safe operation.





Qualification Targets Inc © 2019

| 1145 Clyde Hanson Drive, Hammond, WI | 866-498-8228 | 715-796-5201 |